Liberty Cap Cents 1793-1796 Coin Guide
Back to Coin
Encyclopedia Index
Liberty Cap Cents 1793-1796
The Liberty Cap large cents of 1793-1796 are the classics of early
American copper coinage. They represent the third step in the infant
Philadelphia Mint's quest for a permanent cent design, succeeding the
Chain and Wreath cents that began the new decimal coinage early in 1793.
This third design was created by Joseph Wright, a New Jersey native and
portraitist whose most famous works were his 1783 paintings of George and
Martha Washington. In August 1793, Wright began work at the Mint as an
engraver and die-sinker under the renowned scientist, Mint Director David
Rittenhouse.
Copper cents were still a novelty when Wright cut his dies. Most
Americans had yet to see any of the new Federal coinage, still limited to
cents and half cents. The citizens of the sprawling nation-only in its
sixth year under the Constitution-thought in terms of Spanish milled
dollars, state copper coins and private tokens (when they thought of coins
at all). So it was most important that the public would accept the new
cent, particularly since the Chain cent received such harsh reviews when
first released. This criticism may have been on Wright's mind as he began
his work.
For the Liberty Cap cent, Wright drew inspiration from a popular
design, French medalist Augustin Dupre's 1783 Libertas Americana Medal.
This famous early American medal bore a youthful Liberty facing left, her
hair unbound and flowing in the wind, superimposed on a pole topped by a
pileus, the helmet-like emblem of freedom. Commemorating American
victories at Saratoga and Yorktown, the medal was a private project of
statesman-philosopher Benjamin Franklin and was distributed to many VIPs
on both continents. It served its purpose well as a symbol of French
support for the American cause.
Wright turned Liberty to the right and replaced the beehive-like pileus
with the soft Phrygian cap worn in ancient times by newly freed slaves to
signify their liberation. The reverse presented a sparser laurel wreath
than the preceding coinage, bearing single berries on individual stems.
The first Wright coins were in higher relief than later designs, their
obverses shifting from beaded to denticled borders. Their edges bore the
incuse inscription ONE HUNDRED FOR A DOLLAR, ending in a leaf.
No other U.S. coins have attracted such intense study and devotion as
the large cents of this type. Both 20th century cataloguer Dr. William H.
Sheldon and 19th century dealer Samuel Hudson Chapman agreed that serious
U.S. coin collectors would gravitate to early copper and that many would
almost surely end up specializing in the date 1794, with its many
varieties. Today, many avid devotees belong to the Early American Coppers
Club (EAC), probably the most dedicated group of specialists in the world.
The roster of distinguished large cent researchers includes Sylvester
S. Crosby, who published the first treatise on 1793 cents with J.N.T.
Levick in 1869. Intense work on the 1794 cents began with Philadelphia's
amiable Quaker, Doctor Edward Maris, who ultimately identified 52
varieties. Ongoing studies were made by such numismatists as Edouard
Frossard, Thomas L. Elder, David Proskey and Howard R. Newcomb. The
greatest modern large cent researcher was Dr. Sheldon, whose definitive
Early American Cents was published in 1949 and revised in 1958 as Penny
Whimsy with the aid of Dorothy Paschal and Walter Breen. "Sheldon
numbers" are standard today for cents of 1793 through 1814.
Sheldon lists four Liberty Cap cent varieties for 1793. For 1794, he
recorded 56 "collectible" varieties plus several super-rare
"Non-Collectibles." The 1795 cent varieties number only eight,
including four lettered edge, three plain edge and one ultra-rare reeded
edge coin. Plain edges were made necessary by reduction of planchet weight
from 208 grains to 168 grains near the end of the year. This weight change
was necessitated by an increase in the price of copper, which had reached
a point where it cost the Mint $1.22 to produce one hundred cents.
Sheldon's 1795 listing includes the controversial "Jefferson
Head" cent with an unusual square-browed Liberty and pincer-like
"crab claw" leaves in the wreath. Considering the ongoing
efforts of some in Congress to replace the Mint with private contractors,
many numismatists believe that these rare coins were privately struck as
patterns for a coinage contract sought by Philadelphia saw-maker John
Harper.
The Wright design continued into early 1794, outliving its creator, who
died during 1793's yellow fever outbreak without seeing any of his coins
actually struck. The Liberty Cap design was then modified by Robert Scot,
another engraver brought to the Mint by Director Rittenhouse. These coins
display a much lower relief.
One unusual variety, the rarest in the series, is the Starred Reverse,
bearing 94 tiny 5-pointed stars punched in around the reverse rim; another
is the Missing Fraction Bar, which omits the line between 1 and 100 in the
fraction. Most researchers attribute the dies used between December 1794
and April 1796 to John Smith Gardner, a general technician pressed into
service to help meet demand for cents of the new thin-planchet type. Coins
of May to June 1796 were struck from dies once again cut by Scot. In
mid-1796, the Liberty Cap design was replaced by Scot's interpretation of
Gilbert Stuart's Draped Bust motif, with its frumpy Liberty in a Grecian
tunic without the cap and pole.
The Philadelphia Mint produced over 1.5 million Liberty Cap cents
between 1793 and 1796. Most coins of this design encountered today range
from Good to Very Fine. Coins from 1793 are the rarest, while coins dated
1795 and 1796 are the most readily available in high grade and are often
sought by type collectors.
Original red, mint luster is seldom seen, but natural patinas are very
important in determining the coins' value, since copper can take on
beautiful and stable surface colorations over the years. Variations in
planchets, die preparation and striking make these coins challenging to
grade, but generally the points of the design to first show wear are
Liberty's hair at the forehead and above the ear. On the reverse, check
the leaves next to the O and C in ONE.
Obviously, higher grade coins are eagerly sought, but one must keep in
mind that these coins circulated decades before Philadelphia's Joseph J.
Mickley began his search for a cent of his birth year, 1799. Mickley was
among the first to popularize coin collecting in this country. He was
followed by many others, including America's first coin dealer,
English-born Edward Cogan. Cogan started his coin career late in life by
supplying large cents to avid beginners in this new area of collecting.
SPECIFICATIONS:
Diameter: approx. 29 millimeters Weight: 13.48 grams (Let.); 10.89
grams (Plain) Composition: Copper Edge: Lettered, Plain or Reeded
BIBLIOGRAPHY: Alexander, David T., DeLorey, Thomas K.
and Reed, P. Bradley, Coin World Comprehensive Catalog and Encyclopedia of
United States Coins, World Almanac-Pharos Books, New York, 1990. Breen,
Walter, Walter Breen's Complete Encyclopedia of U.S. and Colonial Coins,
F.C.I. Press/Doubleday, New York, 1988. Noyes, William C., Noyes'
Encyclopedia of Large Cents, Volume 1, Litho Technical Services,
Bloomington, MN, 1995. Noyes, William C., United States Large Cents,
1793-1814, published by the author, Monument Beach, CA, 1991. Sheldon, Dr.
William H., Penny Whimsy, A Revision of Early American Cents, Quarterman
Publications, Lawrence, MA, 1976.
Coin Information Provided Courtesy NGC.
|
|
![[Most Recent Quotes from www.kitco.com]](http://kitconet.com/images/quotes_special.gif)