Draped Bust/Small Eagle Dimes 1796-1797 Coin Guide
Back to Coin
Encyclopedia Index
Draped Bust/Small Eagle Dimes 1796-1797
Although the dime is an essential part of the decimal coinage system,
it was one of the last coins issued by the United States Mint when
operations first began. By the time it made its debut in 1796, as the
Draped Bust/Small Eagle dime, the Mint had already been making copper
cents and half cents for three years; silver dollars, half dollars and
half dimes for two years; and even two gold coins-the eagle and half
eagle-for a year. The only other coins delayed, like the dime, until 1796,
were the quarter dollar and quarter eagle.
It's not as though the dime was an afterthought. Actually, Thomas
Jefferson had called for such a coin as far back as 1783 as part of a
proposed decimal system. He was joined in his advocacy by Benjamin
Franklin, Alexander Hamilton and the man who would become the first mint
director, eminent scientist David Rittenhouse. The decimal system was
gradually gaining acceptance for use with calculations, but it had not yet
been used for any nation's monetary structure. The founding fathers
believed that not only was decimal coinage an efficient, workable method
for commerce, but it also symbolized a break from the Old World.
Hamilton, the nation's first treasury secretary, bolstered this view in
1791 in his formal report to Congress, outlining a plan for a national
mint and coinage. He recommended the issuance of coins in six
denominations-including a silver piece "which shall be, in weight and
value, one tenth part of a silver unit or dollar." He suggested that
the dollar be called the "unit," with its tenth part being known
as simply a "tenth."
These names never took hold, but the basic Mint Act of April 2, 1792,
did include provision for both a silver dollar and a coin one-tenth
thereof to be called a "disme." The term disme-pronounced the
same as "dime" and later anglicized to be spelled the same-is
French for "decimal." It first gained wide usage in 1585 when
Dutch mathematician Simon Stevin published a pamphlet (later translated
into French, and then into English) as Disme: the art of tenths, or,
Decimall arithmeticke.
The word "disme" never appeared on a regular-issue United
States coin. But in 1792, before the start of official federal coinage,
about 1,500 half dismes and a handful of dismes were struck bearing the
statement of value in this now strange-seeming phraseology. Although these
are authorized U.S. issues, they are generally regarded as patterns or
provisional pieces. Only three 1792 dismes are known today in silver-with
about fifteen others struck in copper.
After that tentative start, four years would pass before the Mint
produced the first ten-cent coins intended for circulation. The dime (or
disme) remained on the back burner. The dollar, perceived as the most
prestigious coin of the new silver issues, was made first. Then, when
production problems forced the Mint to stop making dollars, it turned
instead to half dollars and half dimes.
Why no dimes? Numismatic researcher R.W. Julian largely attributes the
delay to lack of public demand for this small silver coin, whether from
merchants and their customers or from bullion depositors. Commercial needs
were met adequately by the large numbers of Spanish reales then in
circulation: The one-real coin, worth one "bit." or 12-1/2
cents, provided a convenient and readily available means to pay for small
purchases. Meanwhile, depositors who left silver bullion with the Mint
seeking silver coinage in return, much preferred large coins-especially
silver dollars-to small ones like the dime.
By the time that production of dimes finally began the Mint had already
modified the original designs of the other silver coins, so the dime
denomination missed an entire cycle. The first regular issue silver coins
had featured the so-called Flowing Hair portrait of Miss Liberty, but by
1796 this likeness had given way to a more sedate Draped Bust portrait-and
that's the one that appeared on the very first dimes.
The Draped Bust/Small Eagle design by Mint Chief Engraver Robert Scot
features a buxom portrait of Liberty, her flowing hair tied by a ribbon
and her neckline covered with drapery, encircled by stars at the sides.
The inscription LIBERTY appears above and the date below.The reverse
depicts a small, spread-winged eagle perched upon clouds and surrounded by
palm and olive branches. Encircling this is the motto UNITED STATES OF
AMERICA. The coin carries no statement of value-curiously, the Mint Act of
1792 required that only the copper cent and half-cent be inscribed with
denominations.
Pieces dated 1796 have fifteen stars-one for each state in the Union
then. In 1797 some dimes were struck with sixteen stars (reflecting
Tennessee's admission as the 16th state) and some with thirteen,
symbolizing the thirteen original states. Such dies were prepared after
the Mint abandoned the idea of adding an extra star for each new state.
Legend has it that Liberty's portrait was based on a drawing of
Philadelphia socialite Ann Willing Bingham, one of the most beautiful
women of her time. The drawing was prepared by portraitist Gilbert
Stuart-reportedly at the urging of President George Washington himself,
who felt the early coins were in need of artistic improvement. Stuart's
sketch was translated to plaster by artist John Eckstein, and the dies
were then executed by Scot.
This first regular issue dime was minted for only two years. In 1798
the small, naturalistic eagle gave way to a larger heraldic version,
creating a brand new type. During this brief run, the Mint produced a
total of 47,396 pieces. Although Mint records show a slightly higher
output in 1797, the late Walter Breen, a noted numismatic scholar,
speculated that some dimes made in 1797 may have been dated 1796. Dimes
dated 1797 are rarer across the grade spectrum than the first-year pieces,
and particularly so in Mint State.
At least several dozen uncirculated 1796s exist-a few with prooflike
surfaces, possibly made as presentation pieces for VIPs. The famed
collector, Colonel E.H.R. Green, son of "The Witch of Wall
Street," fabulously wealthy Hetty Green, possessed a small hoard of
uncirculated 1796s, all of which were dispersed after his death in 1936.
There are only three basic varieties in the series: the 1796, the 1797
with sixteen stars and the 1797 with thirteen stars. Thus, some collectors
pursue complete sets, despite the high cost of each component. Many,
however, treat this as a type coin and acquire just one specimen to
represent the series. When grading this design, wear will first show on
Liberty's bust, shoulder and the hair above the ear and at the forehead.
On the reverse, check the eagle's head and wing tops.
SPECIFICATIONS:
Diameter: 19 millimeters Weight: 2.70 grams Composition: .8924 silver,
.1076 copper Edge: Reeded Net Weight: .07747 ounce pure silver
BIBLIOGRAPHY: Bowers, Q. David, United States Coins by
Design Types, Bowers and Merena Galleries, Wolfeboro, NH, 1986. Breen,
Walter, Walter Breen's Complete Encyclopedia of U.S. and Colonial Coins,
F.C.I. Press/Doubleday, New York, 1988. Davis, David J.; Logan, Russell
J.; Lovejoy, Allen F.; McCloskey, John W.; Subjack, William L., Early
United States Dimes, 1796-1837, John Reich Collectors Society, Ypsilanti,
MI, 1984. Taxay, Don, The U.S. Mint and Coinage. Arco Publishing Co. Inc.,
New York, 1966. Yeoman, R.S., A Guide Book of United States Coins, 48th
Edition. Western Publishing Co., Racine, WI, 1994
Coin Information Provided Courtesy NGC.
|
|
![[Most Recent Quotes from www.kitco.com]](http://kitconet.com/images/quotes_special.gif)