
Kennedy Half Dollars 1964 (to present) Coin Guide
Back to Coin
Encyclopedia Index
Kennedy Half Dollars 1964 to present
It is said that every American who was alive in 1963 remembers exactly
what he or she was doing at the moment they heard the news of President
Kennedy being shot. Then, just a couple of hours later, came the awful
report that he had died. It's hard for anyone who was not a witness to
those sad days to fully comprehend the sense of loss which overtook the
nation. This grief found expression in the renaming of many civic
structures, roadways and even geographical features in honor of the slain
leader. Of all these memorials, however, the United States half dollar
bearing Kennedy's familiar likeness will almost certainly survive the
longest, since coins, being nearly indestructible, have a long track
record as the most durable witnesses to history.
The story of the Kennedy half dollar's inception is perhaps best told
in the words of then Chief Engraver of the United States Mint, the late
Gilroy Roberts:
"Shortly after the tragedy of President Kennedy's death, November
22, 1963, Miss Eva Adams, the Director of the Mint, telephoned me at the
Philadelphia Mint and explained that serious consideration was being given
to placing President Kennedy's portrait on a new design U.S. silver coin
and that the quarter dollar, half dollar or the one dollar were under
discussion.
"A day or so later, about November 27, Miss Adams called again and
informed me that the half dollar had been chosen for the new design, that
Mrs. Kennedy did not want to replace Washington's portrait on the quarter
dollar. Also it had been decided to use the profile portrait that appears
on our Mint list medal for President Kennedy and the President's Seal that
has been used on the reverse of this and other Mint medals."
This work was undertaken immediately, Gilroy Roberts sculpting the
portrait obverse, while his longtime Assistant Engraver, Frank Gasparro,
prepared the reverse model bearing the presidential seal. Both were amply
experienced in these tasks. Along with the sculpting of various mint
medals, Roberts had prepared the models of John R. Sinnock's design for
the Benjamin Franklin half dollar of 1948, following Sinnock's death the
previous year. Gasparro too was a veteran of numerous medal designs, and
he had most recently created the new reverse which debuted on the Lincoln
cent in 1959. For these two artists, time was of the essence, as the new
year loomed ahead, and the Treasury Department did not want to issue any
of the existing-type Franklin half dollars dated 1964. Complicating
matters still further was a severe, nationwide shortage of all coins. Half
dollars of one type or the other had to be ready for coining early in the
new year to avert a worsening of this shortage.
In the meantime, however, there was a legal hurdle to overcome: Under
existing law, U. S. coin designs could not be changed more often than
every 25 years; the Franklin half was then only 15 years old, and its
replacement would quite literally require an act of Congress. Partisan
disputes were largely set aside in recognition of the nation's and the
world's loss, and Congress managed to pass legislation permitting a change
in the half dollar's design with only a few weeks' debate. The Act of
December 30, 1963 made the Kennedy half dollar a reality.
Using his existing models for JFK's presidential medal as a guide,
Roberts completed his intial rendering of the half dollar within days of
its commissioning. Gasparro, too, worked feverishly, and trial strikes of
the Kennedy half were run off and dispatched to Mint Director Adams on
December 13. A few days later, these were viewed by the President's widow,
Jacqueline, and brother, U. S. Attorney General Robert F. Kennedy.
Incorporating some of Mrs. Kennedy's comments into his revised models,
Roberts had additional trial strikes coined. These were viewed and
approved by Treasury Secretary Douglas Dillon, who agreed that Mrs.
Kennedy's wishes had been met.
The first Kennedy half dollars made for distribution were proofs coined
early in 1964. By January 30, regular-issue coinage began at the Denver
Mint, and the Philadelphia Mint followed suit the week after. These coins
were released to the public amid much fanfare and anticipation on March
24, 1964. Despite limiting the number of coins they would sell to each
individual, banks were quickly denuded of their supplies; few of the coins
ever achieved actual circulation. From its very inception, the Kennedy
half dollar became a keepsake, one cherished not only by Americans but by
the late President's many foreign admirers, as well.
The number of Kennedy halves produced during 1964 was enormous in
comparison to previous half dollar mintages. Despite this, the coins
continued to disappear as fast as they were issued. With the nationwide
shortage of all coins showing no let-up, Congress enacted a law which
permitted freezing the 1964 date on U. S. coins until such time as the
crisis passed. This was done in an effort to discourage hoarding by
collectors and speculators, but the real problem lay in methods of
distribution and recirculation, rather than being caused by the
insignificant actions of hobbyists.
When Congress opted to eliminate silver from the dime and quarter
beginning in 1965, it reached a compromise with the half dollar: Its
silver content, while greatly reduced overall, was placed almost entirely
at the coin's surface by bonding three strips of metal, the innermost one
being primarily copper. These "silver-clad" pieces were coined
from 1965 through 1970. Despite these various steps, Kennedy half dollars
still failed to circulate to any great extent, and the question of
eliminating its silver content altogether was eventually raised. After
protracted debate during 1969-70, a bill was finally passed near the end
of 1970 which called for the coining of half dollars in the same
composition used since 1965 for the dime and quarter: two outer layers of
copper and nickel bonded to an inner core of pure copper. From 1971
onward, the Kennedy half dollar would bear the red edge which had already
become familiar to Americans who mourned the passing of silver from the
nation's coinage. Alas, even this concession was not enough to make half
dollars reappear in circulation, and today they are known only to coin
collectors and gambling casino patrons.
For the nation's bicentennial in 1976, a special reverse was prepared
by Seth G. Huntington which depicted Philadelphia's Independence Hall,
birthplace of the United States. Huntington's design had been selected
from among numerous entries in a 1973 competition. Bicentennial halves
bearing the dual dates 1776-1976 were coined during 1975 and 1976 in both
copper-nickel-clad and silver-clad compositions. The latter were not
released to circulation, but rather were sold at a premium to collectors
in both uncirculated and proof editions.
There are no rare date/mint combinations in the Kennedy half dollar
series, although some pieces saw limited distribution. Proofs were coined
for collectors in 1964 at the Philadelphia Mint and since 1968 at the San
Francisco Mint. So-called "special mint set" coins were offered
in place of true proofs during 1965-67, and these are usually collected in
conjunction with the proof sets. The 1970-D half dollars were struck only
to fill that year's orders for mint sets, pending the change to
copper-nickel coinage; the silver-clad, bicentennial halves were likewise
coined only for collectors. In 1987, the Mint announced that no half
dollars of that date would be issued for circulation, and this caused a
surge in the number of mint sets ordered. Finally, since 1992, the Mint
has offered proof sets of both the conventional copper-nickel coinage and
ones in which the dime, quarter and half are .900 fine silver, the
composition used in 1964 and earlier years.
SPECIFICATIONS:
Diameter: 30.6 millimeters Edge: Reeded Weight: 12.50 grams (silver)
Composition: .900 silver, .100 copper Net weight: .36169 ounce pure silver
Weight: 11.50 grams (silver-clad) Composition: .400 silver, .200 copper
bonded to .209 silver, .791 copper Net weight: .14792 ounce pure silver
Weight: 11.34 grams (copper-nickel-clad) Composition: .750 copper, .250
nickel bonded to pure copper
BIBLOGRAPHY: Breen, Walter, Walter Breen's Complete
Encyclopedia of U.S. and Colonial Coins, F.C.I. Press/Doubleday, New York,
1988. Taxay, Don, The U.S. Mint and Coinage, Arco Publishing Co., New
York, 1966. Tomaska, Rick Jerry, Cameo and Brilliant Proof Coinage of the
1950 to 1970 Era, R & I Publications, Encinitas, CA, 1991. Wiles,
James, Ph.D, The Kennedy Half Dollar Book, Stanton Printing &
Publishing, Savannah, GA, 1998. Yeoman, R.S., A Guide Book of United
States Coins, 49th Edition, Western Publishing Co., Racine, WI, 1995.
Coin Information Provided Courtesy NGC.
|
|